The manufacturer's adhesive must be used with this product, please add some to your order today. We strongly recommend a professional decorator experienced in hanging fabric back products to apply your wall covering. *Glitter is cut to order and is non returnable.* When hanging this product, Arrange product in roll sequence. Starting with the highest number first, cut and hang in sequence. The Glitter should be hung the same way as it comes off the roll, if not there will be a shading difference. Apply the adhesive evenly to the wall using a medium pile roller and a brush for cutting in. Allow adhesive to tack off. Do not allow adhesive to get onto the face of your Glitter, removal will be impossible. At the top and bottom of each drop allow the Glitter to settle for approximately one hour before trimming and we suggest that 3 lengths hung at one time. The Glitter has movement therefore this will help before making any cuts. Glitter should be overlapped and spliced, overlap approx. 5cm and trim through the center. We suggest, two knifes used for each joint, replacing a new blade every joint in both knifes. Once the drop is in place, make the finishing touches to the joint taking care not to squeeze out adhesive onto the face. The joint may be seam rolled if required. Ensure you do not overwork the joint, as this may cause damage.